Navigation System with CD Drive Control Module J401 , removing and installing

Special tools, testers and auxiliary items required 

Fig 1: Identifying Special Tools - Radio Removal Tool T10057

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Radio removal tool T10057

• Turn off all electrical components.
• Remove ignition key.

Removing 

• Open left luggage compartment storage bin.

Fig 2: Identifying Navigation System With CD Drive Control Module J401 And Installation Frame

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Insert two clips on Radio Removal Tool T10057 into release slits on Navigation System with CD Drive Control Module J401 - 2  - until they engage. Points on grip eyes face outward.
• Remove Navigation System with CD Drive Control Module J401 - 2  - from installation frame - 1  -.
• Disconnect connectors on Navigation System with CD Drive Control Module J401 - 2  -.
• Remove Radio Release Tool T10057 by pressing locking tabs on Navigation System with CD Drive Control Module J401.

Installing 

• Connect all harness connectors.
• Slide Navigation System with CD Drive Control Module J401 in until it engages in mounting frame.
• If necessary, perform adaptations on Navigation System with CD Drive Control Module J401.