Read Measuring Value Block (function 08)

Performing the function "Read Measuring Value Block"

Rapid data transfer HELP
Select function XX

Indicated on display

Rapid data transfer Q
08 - Read Measuring Value Block

Indicated on display

Read Measuring Value Block
Enter display group number XXX

Indicated on display

The measuring value block which has been selected will appear in the standard format.

Display group overview up to m.y. 2001:

Display Group number	Indicated on display
001	1 = Speed signal (level GALA) 2 = Voltage, terminal 30 3 = Radio illumination dimming in % 4 = Condition of S contact
002	1 = Front loudspeakers 2 = Condition of front loudspeakers 3 = Rear loudspeakers 4 = Condition of rear loudspeakers
003	1 = Type of antenna 2 = Antenna 3 = Condition of antenna
004	1 = Control output for active amplifier 3 = Telephone 4 = Condition of telephone mute input
005	1 = CD connection 2 = Condition of CD connection
006	1 = External display (instrument cluster) 2 = Condition of external display

Display group overview from m.y. 2002:

Display group number	Indicated on display
001	1 = Voltage terminal. 30 2 = Active amplifier control output 3 = Telephone 4 = Condition of telephone-mute input
002	1 = Front speakers 2 = Condition of front speakers
003	1 = Type of antenna 2 = Antenna 3 = Antenna condition
004	1 = CD connection 2 = Condition of CD connection

Measuring Value Block 001 up to m.y. 2001


Read Measuring Value Block 1			→	← Indicated on display
0	12.3 V	60 %	ON
				Condition of S contact Can be checked while measuring values are being displayed Ignition key withdrawn: display reads "OFF" S contact reactivated: display reads "ON"
			Dimming level of radio illumination in % (only when lights are on) 0 - 99%
		Voltage, terminal 30
	Speed signal (level GALA) 0 = Level low 1 = Level high

Measuring Value Block 001 from m.y. 2002


Read Measuring Value Block 1			→	← Indicated on display
12.3 V	OK	Telephone	OFF
				Condition of input telephone mute Telephone in use = "ON" Telephone switched off = "OFF"
			Telephone
		Condition of active amplifier control output "OK" "Short circuit"
	Voltage terminal 30

Measuring Value Block 002 up to m.y. 2001


Read Measuring Value Block 2			→	← Indicated on display
Front speaker	OK	Rear speaker	OK
				Condition of rear speaker 1) OK Short circuit Open circuit
			Rear speaker 1)
		Condition of front speaker OK Short circuit Open circuit
	Front speaker

1) Display only for passive rear speakers.

Measuring Value Block 002 from m.y. 2002


Read Measuring Value Block 2			→	← Indicated on display
Front speaker	OK


		Condition of front speaker OK Short circuit Open circuit
	Front speaker

Measuring value block 003


Read Measuring Value Block 3			→	← Indicated on display
Active	Antenna	OK

			Condition of antenna OK Short circuit Open circuit
		Antenna (antenna)
	Type of antenna Passive Active

Measuring value block 004 up to m.y. 2001


Read Measuring Value Block 4			→	← Indicated on display
0		Telephone	OFF
				Condition of telephone mute input Telephone in use = "ON" Telephone switched off = "OFF"
			Telephone

	Condition of control output for active amplifier 0 = OK 1 = Short circuit to Ground (GND)

Measuring value block 004 from m.y. 2002


Read Measuring Value Block 4			→	← Indicated on display
CD connection	OK


		Condition of CD connection OK not OK 1)
	CD connection

1) Display also if no CD changer is installed.

Measuring value block 005 up to m.y. 2001


Read Measuring Value Block 5			→	← Indicated on display
CD connect	OK


		Condition of CD connection OK Not OK 1)
	CD connection

1) Display will also appear even if no CD changer is installed.

Measuring value block 006 up to m.y. 2001


Read Measuring Value Block 6			→	← Indicated on display
ext. Displ.	OK


		Condition of external display OK Not OK 1)
	External display (instrument cluster)

1) Display will also appear even if instrument cluster does not have a display.