LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2007 >> A3 Base, Automatic DCT >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 2.0L - Generic Scan Tool - Engine Code(S): BPY >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions >> Test-ID 33 ($21): Catalytic Converter Monitoring
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test-ID 33 ($21): Catalytic Converter Monitoring

-- Connect the scan tool.

-- Start the engine and run at idle.

-- Select "Mode 6: Check test the results of components that are not continuously monitored".

Select "Test-ID 33 ($21)".

-- Select the desired "Test-ID (TID)" or "Hex-ID".

-- Check specified values at idle.

Test-ID (TID) (Hex-ID) DTC Component or System Min. Max. Additional Information
132 ($84) P0420 Catalytic converter monitoring bank 1. --- 65535 ms Refer to DTC P0420 in the SAE P0XXX DIAGNOSTIC TROUBLE CODES .

-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .

-- Switch the ignition off.

-- End of diagnosis.

scientia non olet · About LEMON Manuals