Selector Mechanism Overview Up To 11.2009
NOTE:
Coat the bearings and the sliding surfaces with polycarbamide grease G 052 142 A2.
- Cable Mounting Bracket
- Selector lever cable to transmission
- Bolt
- 23 Nm
- Quantity: 2
- For attaching the cable bracket to the transmission
- Selector Lever Cable
- Do not bend
- The selector lever cable must be replaced if the protective sleeve is damaged.
- Refer to SELECTOR LEVER CABLE, CHECK AND ADJUST IF NECESSARY
- Refer to SELECTOR LEVER CABLE
- Do not lubricate the cable eye and ball socket
- Nut
- 13 Nm
- Quantity: 2
- For holder on transmission
- Bracket
- For selector lever cable
- Nut
- 8 Nm
- Quantity: 4
- For selector mechanism to body
- Stop Buffer for Selector Lever
- Clipped into the selector mechanism
- Selector Mechanism Function Unit
- Refer to SELECTOR MECHANISM EMERGENCY RELEASE FROM PARK, WITH STATIONARY SELECTOR LEVER COVER, ACTIVATING
- Refer to SELECTOR LEVER EMERGENCY RELEASE FROM PARK POSITION, WITH SELECTOR LEVER BOOT, ACTIVATING, UP TO 11.2009
- Refer to SELECTOR MECHANISM FUNCTION UNIT
- With integrated selector lever sensor system control module -J587- withselector lever -E313-, tipronic switch -F189-, Selector lever park position lock switch -F319- and Shift lock solenoid -N110-, do not touch these
- Check the vehicle through the Guided Fault Finding vehicle tester.
- With integrated selector lever sensor system control module -J587- withselector lever -E313-, tipronic switch -F189-, Selector lever park position lock switch -F319- and Shift lock solenoid -N110- can only be replaced with the mechanism function of the selector mechanism, refer to SELECTOR MECHANISM FUNCTION UNIT
- Disengaging Spring
- Bolt
- 3.5 Nm
- Mounting Pin
- For selector lever cable to selector mechanism function unit
- Bolt
- 3.5 Nm
- Quantity: 4
- For locking plate on the selector mechanism
- Locking Plate
- Cover
- For the selector mechanism function unit
- With seal
- Nut
- Replace
- 9 Nm
- Quantity: 4
- Self-locking
- For cover on the selector mechanism
- Clip
- Replace
- For selector lever cable to selector mechanism function unit