Operating switch on multi-function steering wheel, removing and installing

Removing 

• Remove driver's side airbag unit.

Refer to 69 - PASSENGER PROTECTION - AIRBAGS, SEAT BELTS

Fig 1: Identifying Bolts, Connector, Operating Switch, And Airbag Unit

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts -3-.
• Unplug the connector -4-.
• Slide operating switch -1- out of airbag unit -2- toward front.

Installing 

Installation is the reverse of removal, paying attention to the following:

• Tighten bolts -3- of operating switch to 1.1 Nm.