Climatronic Control Module J255, removing and installing
Removing
- Removal on vehicles with no radio navigation system or radio with large control panel
- Reach from underneath into center console and release operating and display module, Climatronic Control Module J255 from center console.
NOTE:
- If operating and display module, Climatronic Control Module J255 cannot be removed, proceed as for vehicles with radio navigation system.
- Removal on vehicles with radio navigation system or radio with large control panel
- Remove radio or radio navigation system →
- 91 - COMMUNICATION
- 91 RADIO, TELEPHONE, NAVIGATION, TRIP COMPUTER for COMMUNICATION, CABRIOLET
- Reach through this opening and slide operating and display module, Climatronic Control Module J255 to rear out of center console.
NOTE:
- The operating and display module, Climatronic Control Module J255 is held in position in the center console by way of 4 clips - A -.
- In the event of incorrect Instrument Panel Interior Temperature Sensor G56 measurements, check intake grille of operating and display module, Climatronic Control Module J255 trim panel (must not be closed off) as well as operation of Interior Temperature Sensor Fan V42.
- On replacing operating and display module, Climatronic Control Module J255, pay attention to precise assignment (e.g. without or with heated seat switch) .
- Operating and display units, Climatronic Control Module J255 for vehicles with no radio navigation system - A - are additionally provided with a trim panel - B - with 2 bolts - C -.
- Release connectors - A - to - D - and - F - by pressing retainer tabs and disconnect connectors.
- Remove bolts - C -, slide trim panel - B - to right and remove it from operating and display module, Climatronic Control Module J255 - A -.
- Install in reverse order.