LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2007 >> S6 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Engine Control Systems >> 5.2L - Generic Scan Tool - Engine Code: BXA >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions >> OBDMID 162 ($A2): Mis-Fire Cylinder 1 Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

OBDMID 162 ($A2): Mis-Fire Cylinder 1 Data

-- Connect the scan tool.

-- Start the engine and let run at idle speed.

-- Select "Mode 6: Check test the results of components that are not continuously monitored".

Select "OBDMID 162 ($A2)".

-- Select the desired "Test-ID (TID)" or "Hex-ID".

-- Check specified values at idle.

Test-ID (TID) (Hex-ID) DTC Component or System Min./Max. Values Additional Information
11 ($0B) P0301 Crankshaft speed fluctuation, single or multiple misfire check. 0 - 65535 (counts) Refer to DTC P0301 in the DTC table Engine Control Module - P0301 .
12 ($0C) P0301 Crankshaft speed fluctuation, single or multiple misfire check. 0 - 65535 (counts) Refer to DTC P0301 in the DTC table Engine Control Module - P0301 .

-- If any of the components or systems fail to meet the specified values, refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure. Refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY .

-- Switch the ignition off.

-- End of diagnosis.

scientia non olet · About LEMON Manuals