LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2007 >> S6 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Ignition System >> 5.2L - Generic Scan Tool, Engine Code(S): BXA (St-Generic Scan Tool) >> ST - Generic Scan Tool >> Diagnostic modes >> Diagnostic Mode 05: Check lambda test results
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Diagnostic Mode 05: Check lambda test results

NOTE:
  • The diagnostic information for "Diagnostic Mode 5: check lambda test results" is not supported in this section of the 2007 S6 5.2L Generic Scan Tool (GST) service article and has been moved to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" section.
  • Refer to "Diagnostic Mode 6: Checking test results of components that are not continuously monitored" for the static values of all oxygen sensors and all emission related components → Diagnostic mode 6: Checking test results of components that are not continuously monitored .
NOTE:
  • Depending on scan tool and protocol used, diagnostic mode 05 and the information provided may be referred to by a different name.
scientia non olet · About LEMON Manuals