LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2007 >> S8 >> Repair and Diagnosis (Single Page) >> Body & Frame >> Door Locks >> Electrical Equipment >> 94 - Lights, Switches - Exterior >> Steering Column Switch Module >> Steering Column Switch Module, Removing and Installing >> Steering Column Switch Module, Removing and Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Column Switch Module, Removing and Installing

Special tools, testers and auxiliary items required 

Fig 1: T8 Screwdriver T40056 A
GW00022893Courtesy of VOLKSWAGEN UNITED STATES, INC.

Removing 

CAUTION: Follow safety precautions when working on knee airbag → 69 - PASSENGER PROTECTION - AIRBAGS, SEAT BELTS .
CAUTION: Contrary to the procedure described in "Battery, disconnecting and connecting" , the ignition must be on and remain on while disconnecting the battery when working on airbag components.
Fig 2: Lower Trim, Upper Steering Column Switch Trim, Screws, Hex Socket Bolt & TORX Bolts
GW00030150Courtesy of VOLKSWAGEN UNITED STATES, INC.
Fig 3: Identifying Screw And Electrical Connection
GW00021722Courtesy of VOLKSWAGEN UNITED STATES, INC.
CAUTION: Before disconnecting connector, discharge any electrostatic charge from your body by touching an electrically grounded vehicle component such as the door latch striker pin.
Fig 4: Disengage Connector Lock To Release Connector
GW00021723Courtesy of VOLKSWAGEN UNITED STATES, INC.

Installing 

Install in reverse order of removal, observing the following:

Tightening Specifications 

Component Nm
Steering Column Switch Module 3
Trim for steering column switch 1
Lower trim to steering column 2.5