Diagnostic Trouble Code (DTC) memory, reading
- Connect VAS 5051 Vehicle Diagnosis, Measurement and Information System. Refer to VAS 5051 Vehicle Diagnosis, Measurement and Information System, connecting and selecting functions . In selection touch vehicle system "02 Transmission Electronics". Ignition must be switched on.
Display on VAS 5051
- In selection -1- touch diagnostic function "02 Read DTC memory".
Fig 2: Identifying Content Of DTC Memory & Identification Of Fault On Diagnostic System VAS 5051 Display
Display on VAS 5051:
1 - Contents of the DTC memory:
0 DTC detected
or
X DTCs detected
2 - DTC
DTC
Location of DTC
Type of DTC
A - If DTCs were recognized:
- Print out contents of screen or OBD protocol.
- End function "02 Read DTC memory" by touching ← button.
Display on VAS 5051
- Repair malfunction(s) using DTC Chart. Refer to Diagnostic Trouble Code (DTC) table .
- In selection touch diagnostic function "02 Read DTC memory" again and delete DTC memory. Refer to Diagnostic Trouble Code (DTC) memory, erasing .
- Touch "06 End output".
B - If no DTC was detected:
- Touch "06 End output".