Measured Value Block, reading
CAUTION:
Please observe safety precautions. Refer to Safety Precautions
Test procedure
- Connect VAS 5051 Vehicle Diagnosis, Measurement and Information System. Refer to VAS 5051 Vehicle Diagnosis, Measurement and Information System, connecting and selecting functions and select vehicle system "02 Transmission Electronics". Ignition must be switched on.
or, depending on the desired operation:
- Start engine.
Display on VAS 5051
- Touch -1- diagnostic function "08 Read Measured Value Block".
Display on VAS 5051:
1 - Enter display group Max. input value = 255
- On key pad -2- enter desired 3-digit display group number. Refer to List of Selectable Display Groups and confirm entry by touching Q button.
Example:
- Enter "001" for "Display group number 001" and confirm by touching Q button.
Display on VAS 5051 for display group 001 to 255:
1 - Display group X
2 - Display field 1
Display field 2
Display field 3
Display field 4
NOTE:
- If a display field is not being used, there will be no display.
- To switch to another display field, proceed as follows:
| Display group | VAS 5051 |
| Higher | Press s button |
| Lower | Press t button |
- End function "08 Read Measured Value Block" by touching ← button.