LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2008 >> S6 >> Repair and Diagnosis >> External Pages >> Different car >> Section 51 (3.2L V6 4V Generic Scan Tool, Engine Code(S): BKH) >> 38 - Automatic Transmission - Gears, Hydraulic Controls >> Continuously Variable Transmission, Checking >> Transmission Control Module Function >> Transmission Control Module Function
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Transmission Control Module Function

WARNING: This page is about a different car, the 2009 Audi A6, 2008 Audi A6, 2007 Audi A6, and 2006 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.

The Transmission Control Module (TCM) J217 receives information from the components that affect the shifts and forwards this information to the pressure regulator valves of the valve body, which control the slide valves in the valve body.

Fig 1: Identifying Transmission Control Module (TCM) J217 Components
GW00019467Courtesy of VOLKSWAGEN UNITED STATES, INC.

The Transmission Control Module (TCM) J217 is mounted at the rear of the transmission, directly on the hydraulic unit. The following components are integrated in the control module. - A  - Transmission Output Speed (RPM) Sensor G195 and Transmission Output Speed (RPM) Sensor 2 G196 , - B  - Transmission Fluid Temperature Sensor G93 , - C  - Multi-Function Transmission Range (TR) Switch F125 , - D  - Transmission Input Speed (RPM) Sensor G182 , - E  - Automatic Transmission Hydraulic Pressure Sensor 1 G193 and - F  - Automatic Transmission Hydraulic Pressure Sensor 2 G194. These components are not serviced separately.

scientia non olet · About LEMON Manuals