Headlamp Range Control Module, Removing and Installing

• Component location: On instrument panel support behind instrument cluster.

Removing 

• If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or "Guided Functions".
• Remove instrument cluster → Instrument Cluster, Removing and Installing .

Fig 1: Bracket & Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Remove bolts - arrows  - and remove bracket - 1  - for Headlamp Range Control Module J431 from instrument panel support.

Fig 2: Headlamp Range Control Module J431, Electrical Connector & Nuts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Disconnect electrical connector - 2  -.
• Remove nuts - arrows  - and detach Headlamp Range Control Module J431 - item 1  -.

Installing 

Install in reverse order of removal, observing the following:

• Install instrument cluster → Instrument Cluster, Removing and Installing .

Tightening Specifications