Radio/Navigation Display Control Module

Special tools and workshop equipment required

-- If control module is replaced, select Replacement function for appropriate control module in Guided Fault-Finding routine.

Use the Vehicle Diagnosis, Testing and Information System to do so.

-- Switch off all electrical consumers.

-- Remove the key.

Removing

-- Place radio removal tool -arrows- in release slits on radio/navigation display control module until they engage. Points on grip eyes face outward.

Fig 1: Place Radio Removal Tool In Release Slits On Radio/Navigation Display Control Module Until They Engage

Courtesy of AUDI OF AMERICA, LLC

-- Remove radio/navigation display control module from instrument panel using grip eyes on radio removal tool.

-- Release electrical connectors on radio/navigation display control module and remove it.

-- Remove radio removal tool by pressing locking tabs on radio/navigation display control module.

-- Remove front passenger's airbag disabled indicator lamp. Refer to FRONT PASSENGER AIRBAG DISABLED INDICATOR LAMP .

Installing

-- Install front passenger's airbag disabled indicator lamp. Refer to FRONT PASSENGER AIRBAG DISABLED INDICATOR LAMP .

-- Connect all electrical connectors.

-- Slide radio/navigation display control module straight into instrument panel until it engages in installation frame.