Test-ID 162 ($A2): Misfire Cylinder 1 Data
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Test-ID 162 ($A2)".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min./Max. Values | Additional Information | |
|---|---|---|---|---|---|
| 129 ($81) | P0301 | Crankshaft speed fluctuation, single or multiple misfire check. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. Page 11. | 0 - 65535 (counts) | Refer to DTC P0301 in SAE P0XXXDTCS P0301 . | |
| 129 ($81) | P0301 | Crankshaft speed fluctuation, single or multiple misfire check. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. Page 11. | 0 - 65535 (counts) | Refer to DTC P0301 in SAE P0XXXDTCS P0301 . | |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.
End of diagnosis