Test-ID 33 ($21): Catalytic Converter Monitoring
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Test-ID 33 ($21)".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 132 ($84) | P0420 | Conversion Capability (storage) Check. For additional information, refer to the Bosch Motronic MED 9.1 OBD System Strategy. Page 4. | --- | 1.0 | Refer to DTC P0420 in SAE P0XXXDTCS P0420 . |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.
End of diagnosis