LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2009 >> A6 Base >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> 3.2L - Generic Scan Tool - Engine Code: BKH >> St Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Mode 01 - 09 >> Diagnostic Mode 06 - Read Test Results For Specific Diagnostic Functions >> Test-ID 163 ($A3): Combustion Misfire Cylinder 2 Data
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test-ID 163 ($A3): Combustion Misfire Cylinder 2 Data

-- Connect the scan tool.

-- Start the engine and let run at idle speed.

-- Select "Diagnostic Mode 06 - Checking test results of components that are not continuously monitored".

Select "Test-ID 163 ($A3) ".

-- Select the desired "Test-ID".

-- Check specified values at idle.

Test-ID (TID) (Hex-ID) DTC Component or System Min. Max. Values Additional Information
11 ($0B) P0302 Crankshaft speed fluctuation, single or multiple misfire check 0 - 65535 (counts) Refer to DTC P0302 in the OBD DTC Summary Table for all monitoring values.Engine Control Module - P0302 
12 ($0C) P0302 Crankshaft speed fluctuation, single or multiple misfire check 0 - 65535 (counts) Refer to DTC P0302 in the OBD DTC Summary Table for all monitoring values.Engine Control Module - P0302 

-- If any component or system fails to meet the specified values, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY  to check for stored DTC's or the corresponding diagnostic repair procedure.

-- Switch the ignition off.

scientia non olet · About LEMON Manuals