Test-ID 34 ($22): Catalytic Converter Monitoring Bank 2
-- Connect the scan tool.
-- Start the engine and let run at idle speed.
Check Test Results of Components
-- Select "Diagnostic Mode 06 - Checking test results of components that are not continuously monitored".
Select "Test-ID 34 ($22): Catalytic Converter Monitoring Bank 2".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 132 ($84) | P0431 | Conversion Capability (storage) Check | --- | > 0.6 | Refer to DTC P0431 in the OBD DTC Summary Table for all monitoring values.Engine Control Module - P0431 |
| 135 ($87) | P0431 | Conversion Capability (storage) Check | --- | > 0.6 | Refer to DTC P0431 in the OBD DTC Summary Table for all monitoring values.Engine Control Module - P0431 |
-- If any component or system fails to meet the specified values, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY to check for stored DTC's or the corresponding diagnostic repair procedure.
-- Switch the ignition off.