Test-ID 58 ($3A): Fuel Tank EVAP System Leak Test (0.090")
-- Connect the scan tool.
-- Start the engine and let run at idle speed.
-- Select "Diagnostic Mode 06 - Checking test results of components that are not continuously monitored".
Select "Test-ID 03 ($03)".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 129 ($81) | P0455 | Fuel Tank Leak Test | --- | < 6.5-0.8 Sec | Refer to DTC P0455 in the OBD DTC Summary Table for all monitoring values.Engine Control Module - P0455 |
-- If any component or system fails to meet the specified values, refer to DIAGNOSTIC MODE 03 - READ DTC MEMORY to check for stored DTC's or the corresponding diagnostic repair procedure.
-- Switch the ignition off.