LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2009 >> Q5 >> Repair and Diagnosis >> External Pages >> Different car >> Section 707 (Module Communications Network) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> PINPOINT TEST I : The Front Control Display Interface Module (FCDIM) Does Not Respond To The Diagnostic Scan Tool >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PINPOINT TEST I : The Front Control Display Interface Module (FCDIM) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2016 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Module Communications Network for schematic and connector information.

Refer to Audio System/Navigation - With SYNC Without Touchscreen for schematic and connector information.

Normal Operation and Fault Conditions 

The FCDIM communicates with the diagnostic scan tool through the HS-CAN. The IPC is used as the gateway module.

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 9 (10A) is OK.

scientia non olet · About LEMON Manuals