Diagnostic mode 6: Checking test results of components that are not continuously monitored: Notes
Diagnostic Mode 06 displays the test results of emission related components and systems which are not continuously monitored.
The values of the individual test results must reach the specified value or must be within the min. and max. limits.
NOTE:
- Depending on the scan tool and protocol used, the information displayed in diagnostic mode 06 may be referred to by different names such as Test-ID (TID), Hex-ID, Component-ID (CID), or On-Board Diagnostic Monitor Identifier (OBDMID).
Test requirements
- Exhaust system must be properly sealed between catalytic converter and cylinder head.
- No DTCs in the DTC memory.
- Coolant temperature at least 80°C.
Work procedure
- Connect the scan tool.
- Start the engine and let run at idle speed.
- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select the desired "Test-ID".
The current minimum and maximum values will be displayed on the scan tool screen.
| Test-ID (Hex-ID) | Component or System |
|---|---|
| 01 ($01): Mode 06 - $01 (01): Catalytic Conversion (Bank 1) | Catalytic Conversion (Bank 1) |
| 01 ($01): Mode 06 - TID $01 (01): Catalytic Conversion (Bank 2) | Catalytic Conversion (Bank 2) |
| $02 (02): Mode 06 - TID $02 (02): Oxygen Sensor (Bank 1, Sensor 1) | Oxygen Sensor (Bank 1, Sensor 1) |
| $02 (02): Mode 06 - TID $02 (02): Oxygen Sensor (Bank 2, Sensor 1) | Oxygen Sensor (Bank 2, Sensor 1) |
| 113 ($71): Mode 06 - $03 (03): Secondary Air Injection (AIR) System (Bank 1) | Secondary Air Injection (AIR) System Bank 1 |
| 114 ($72): Mode 06 - TID $03 (03): Secondary Air Injection (AIR) System (Bank 2) | Secondary Air Injection (AIR) System Bank 2 |
| $05 (05): Mode 06 - TID $05 (05): Tank Ventilation System, Tank Vent Valve | Tank Ventilation System, Tank Vent Valve |
| $05 (05): Mode 06 -TID $05 (05): Tank Ventilation System, Tank Leak Test | Tank Ventilation System, Tank Leak Test |