LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2009 >> S5 Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Wiring Diagram [CAUA] (2 Of 2) (Coupe) >> Wiring Diagrams >> Engine Coolant Temperature Sensor, Fuel Pressure Sensor, Intake Manifold Runner Position Sensor, Intake Manifold Runner Position Sensor 2, Engine Control Module
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Coolant Temperature Sensor, Fuel Pressure Sensor, Intake Manifold Runner Position Sensor, Intake Manifold Runner Position Sensor 2, Engine Control Module

GWW8T0-087170513Courtesy of AUDI OF AMERICA, LLC

G62 

Engine coolant temperature sensor Type:BT, Slpdok:, Aim:BTG62

G247 

Fuel pressure sensor Type:BT, Slpdok:, Aim:BTG247

G336 

Intake manifold runner position sensor Type:BT, Slpdok:, Aim:BTG336

G512 

Intake manifold runner position sensor 2 Type:BT, Slpdok:, Aim:BTG512

J623 

Engine control module Type:BT, Slpdok:, Aim:BTJ623 Type:BT, Slpdok:, Aim:BTJ623

T14c 

14-pin connector, in the engine compartment

T60 

60-pin connector Type:BT, Slpdok:, Aim:BTT60

220  - Sensor ground connection (in engine wiring harness)

D141  - Connection 5V (in engine pre-wiring harness)