Accelerator Pedal Module - GX2-, Checking: Notes

General Description 

The Accelerator Pedal Position Sensor -G79- and the Accelerator Pedal Position Sensor 2 -G185- are combined in one component and integrated into the Accelerator Pedal Module - GX2-. They are used to detect the position of the accelerator pedal throughout the entire adjustment range. The Engine/Motor Control Module -J623- detects the driver's request from these signals and uses them to calculate the injection quantity and EPC Throttle valve operation.

The Accelerator Pedal Module - GX2- Contains The Following Components: 

• Accelerator Pedal Position Sensor -G79-.
• Accelerator Pedal Position Sensor 2 -G185-.

The Accelerator Pedal Module - GX2- Components Cannot Be Serviced Separately, And They Must Be Serviced As A Unit.

Special Tools And Workshop Equipment Required 

• Multimeter.
• Wiring Diagram.
• Scan Tool.

Test Requirements 

• Fuses OK.
• Battery voltage OK.
• Switch OFF all electrical and electronic accessories.
• Vehicles with automatic transmission, ensure the selector lever position is in "P".
• Vehicles with manual transmission, ensure the shifter lever position is in "N" with the parking brake applied.
• Observe all safety precautions: SAFETY PRECAUTIONS .
• View clean working conditions: CLEAN WORKING CONDITIONS .

Test Procedure