Brake Systems
Front Wheel Brakes, Specifications
| Front Wheel Brake |
| Production-relevant number (PR number) |
|
1LT |
1LD |
1LG 1LV |
1LH, 1ZL 1ZT |
1LJ 1LL |
| Brake caliper |
|
FN-3 16" |
FNR G60 16" |
FNR G60 16" |
FNR G60 17" |
2 FNR 42 AL 18" |
| Brake rotor ventilated |
diameter mm |
314 |
321 |
321 |
347 |
385 |
| Brake rotor, thickness |
mm |
25 |
30 |
30 |
30 |
36 |
| Brake rotor, wear limit |
mm |
23 |
28 |
28 |
28 |
34 |
| Brake caliper, piston |
diameter mm |
57 |
60 |
60 |
60 |
60 |
| Brake pad thickness |
mm |
19.5 |
20.24 |
20.24 |
20.24 |
20.43 |
| Brake pad wear limit |
mm |
3 |
4 |
4 |
4 |
4 |
| Front Wheel Brake RS 6, Steel |
| Production-relevant number (PR number) |
|
1LM |
| Brake caliper |
|
Brembo 19" |
| Brake rotor ventilated |
diameter mm |
390 |
| Brake rotor, thickness |
mm |
36 |
| Brake rotor, wear limit |
mm |
34.4 |
| Brake caliper, 6 pistons mm |
mm |
2 pistons each of diameter 34, diameter 36 and diameter 36 |
| Brake pad thickness with backing plate mm |
mm |
16.62 |
| Brake pad wear limit with backing plate |
mm |
9.5 |
NOTE:
Hairline cracks on brake rotor friction surfaces are often observed during brake repairs. Hairline cracks up to 10 mm long are not a technical flaw and are not cause for brake rotor replacement.
Brake discs with friction surfaces that have worn through should be replaced.
| Ceramic - Front Wheel Brakes |
| Production-relevant number (PR number) |
|
1LN |
| Brake rotor ventilated |
diameter mm |
420 |
| Brake rotor, thickness |
mm |
40 |
| Brake rotor, wear limit |
|
The wear limit is the minimum brake rotor thickness, during manufacturing it is stamped into the brake rotor cup. |
| Brake caliper, 8 pistons |
diameter mm |
8 x diameter 30.2 |
| Brake pad thickness with backing plate |
mm |
20 |
| Brake pad wear limit with backing plate |
mm |
10 |
NOTE:
Hairline cracks on the friction surface on ceramic brakes occur during the manufacturing process and can be found on new brakes in different stampings. Hairline cracks on the friction surfaces are not a reason to exchange the ceramic brake discs.
Rear Wheel Brakes, Specifications
| Rear Wheel Brakes |
| Production-relevant number (PR number) |
|
1KD, 1KQ 2ED |
1KW, 2EE 2EL |
| Brake caliper |
|
C41 (16") |
C43 (17") |
| Brake rotor, ventilated |
diameter mm |
302 |
330 |
| Brake rotor, thickness |
mm |
12 |
22 |
| Brake rotor, wear limit |
mm |
10 |
20 |
| Brake caliper, piston |
diameter mm |
41 |
41 |
| Brake pad thickness |
mm |
16.90 |
17.46 |
| Brake pad wear limit |
mm |
3 |
3 |
| Rear Wheel Brake RS 6 Steel |
| Production-relevant number (PR number) |
|
1KJ |
| Brake caliper |
|
TRW C45 (19") |
| Brake rotor ventilated |
diameter mm |
356 |
| Brake rotor, thickness |
mm |
28 |
| Brake rotor, wear limit |
mm |
26.4 |
| Brake caliper, piston |
diameter mm |
45 |
| Brake pad thickness with backing plate |
mm |
16.9 |
| Brake pad wear limit with backing plate |
mm |
9 |
| Ceramic - Rear Wheel Brakes |
| Production-relevant number (PR number) |
|
1KK |
| Brake caliper |
|
TRW C45 (20") |
| Brake rotor ventilated |
diameter mm |
356 |
| Brake rotor, thickness |
mm |
28 |
| Brake rotor, wear limit |
|
The wear limit is the minimum brake rotor thickness, during manufacturing it is stamped into the brake rotor cup. |
| Brake caliper, 1 pistons |
diameter mm |
45 |
| Brake pad thickness with backing plate |
mm |
16.9 |
| Brake pad wear limit with backing plate |
mm |
9 |
NOTE:
Hairline cracks on the friction surface on ceramic brakes occur during the manufacturing process and can be found on new brakes in different stampings. Hairline cracks on the friction surfaces are not a reason to exchange the ceramic brake discs.