LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2011 >> TT Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Transmission >> Transmission Control Systems >> Controls, Housing - Direct Shift Automatic Transmission 02E (AWD) (Roadster) >> 34 Controls, Housing >> Diagnosis And Testing >> Selector Mechanism Through 11.09 >> Connectors On Selector Mechanism, Checking
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Connectors On Selector Mechanism, Checking

Determine the cause of the fault using Guided Fault Finding  before servicing or checking the connector using the vehicle diagnostic tester.

Check all the control modules for faults stored the Diagnostic Trouble Code (DTC) memories and erase them if necessary before checking the connectors using the vehicle diagnostic tester.

Fig 1: Shift Lock Solenoid In Selector Mechanism
GWWA37-0677Courtesy of AUDI OF AMERICA, LLC

A - 10-pin connector for connecting wires from the selector mechanism to the transmission (with CAN bus lines)

B - 4-pin connector to the shift lock solenoid -N110- and selector lever park position lock switch -F319-

C - 10-pin connector to selector mechanism cover

scientia non olet · About LEMON Manuals