LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2012 >> A4 2.0T >> Repair and Diagnosis >> External Pages >> Different car >> Section 1059 (Module Communications Network (2 Of 2)) >> Diagnosis And Testing >> Communications Network >> Pinpoint Tests >> Pinpoint Test Z : The Rear Audio Control Module (RACM) Does Not Respond To The Diagnostic Scan Tool >> Notes
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Pinpoint Test Z : The Rear Audio Control Module (RACM) Does Not Respond To The Diagnostic Scan Tool: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Refer to Wiring Diagram Module Communications Network for schematic and connector information.

Refer to Wiring Diagram Audio System/Navigation - Expedition for schematic and connector information.

Normal Operation and Fault Conditions 

The RACM communicates on the HS-CAN3, and communicates with the diagnostic scan tool through the HS-CAN2. Diagnostic messages are sent/received through the HS-CAN2 circuits at the DLC, and translated through the GWM to the HS-CAN3.

Possible Sources 

Visual Inspection and Diagnostic Pre-checks 

Verify BCM fuse 33 (20A) is OK.

scientia non olet · About LEMON Manuals