ATEQ TPMS Reset Procedure
NOTE:
On Audi vehicles, the TPMS3 cannot be used to register the TPMS sensors, or reset the TPMS.
NOTE:
Whenever tire pressure is adjusted, the new pressure has to be stored again.
The tire pressures must be saved in either the radio or MMI (depending on equipment) each time the tire pressure is adjusted or a tire is changed:
- Switch the ignition ON.
- Push the CAR button, located on the center console. See Fig 1.
- On the Multimedia Interface (MMI) menu, select TIRE PRESSURE MONITORING SYSTEM by turning the MMI Control Knob. Push KNOB to select.NOTE: A typical MMI menu path is SERVICING & CHECKS -> TIRE PRESSURE MONITORING -> STORE TIRE PRESSURES. Individual systems may vary slightly.
- Save the tire pressure by pressing the MMI KNOB.