LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2012 >> Q5 2.0T >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> 2.0L - Generic Scan Tool - Engine Code(S): CAEB >> Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Procedures >> Engine Coolant Temperature Sensor, Checking >> Testing If Display Is Approx. - 40.0° C
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Testing If Display Is Approx. - 40.0° C

-- Disconnect the Engine Coolant Temperature (ECT) Sensor -G62- electrical harness connector -arrow-.

Fig 1: Identifying Engine Coolant Temperature (ECT) Sensor G62 Electrical Harness Connector
GWWM24-0546Courtesy of AUDI OF AMERICA, LLC

-- Using a jumper wire, connect the Engine Coolant Temperature (ECT) Sensor -G62- electrical harness connector terminals 1 to 2.

-- Check the value indicated on the scan tool display.

Fig 2: 2-Pin Electrical Connector & Terminals
GWWA28-0040Courtesy of AUDI OF AMERICA, LLC

If the value jumps to approx. 140.0° C

-- End diagnosis and switch the ignition off.

-- Replace the Engine Coolant Temperature (ECT) Sensor - G62-. Refer to appropriate service information.

If indication remains at approx. -40.0° C:

scientia non olet · About LEMON Manuals