Power Adjustable Steering Column Control Module -J866-, REMOVING AND INSTALLING: Installing
WARNING: This page is about a different car, the 2021 Audi e-tron Quattro and 2019 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- After installing a new Power Adjustable Steering Column Control Module -J866- activate the control module.
-- Connect the Vehicle Diagnostic Tester.
-- Switch the ignition on.
-- Select and start the Diagnostic operating mode.
-- Select the Test plan tab.
-- Select the Select individual test button and select the following tree structure consecutively:
- Diagnostic-Capable Systems
- 0009 - Electronic central electric J519
- 0009 - Power Adjustable Steering Column Control Module J866
- 0009 - Replace Power Adjustable Steering Column Control Module J866
-- Start the selected program and follow the instructions on the Vehicle Diagnostic Tester display.