LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2012 >> S5 4.2, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Wiring Diagram [CAUA] (2 Of 2) (Coupe) >> Wiring Diagrams >> Map Controlled Engine Cooling Thermostat, Engine Control Module, Intake Manifold Runner Control Valve, Intake Flap Motor, Variable Intake Manifold Runner Motor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Map Controlled Engine Cooling Thermostat, Engine Control Module, Intake Manifold Runner Control Valve, Intake Flap Motor, Variable Intake Manifold Runner Motor

GWW8T0-087110513Courtesy of AUDI OF AMERICA, LLC

F265 

Map controlled engine cooling thermostat Type:BT, Slpdok:, Aim:BTF265

J623 

Engine control module Type:BT, Slpdok:, Aim:BTJ623 Type:BT, Slpdok:, Aim:BTJ623

N156 

Intake manifold tuning valve Type:BT, Slpdok:, Aim:BTN156

N316 

Intake manifold runner control valve Type:BT, Slpdok:, Aim:BTN316

ST1 

Fuse panel 1

SB7 

Fuse 7 (on fuse panel B) Type:BT, Slpdok:, Aim:BTSB-

T14d 

14-pin connector, in the engine compartment

T60 

60-pin connector Type:BT, Slpdok:, Aim:BTT60

T94 

94-pin connector Type:BT, Slpdok:, Aim:BTT94

V157 

Intake flap motor Type:BT, Slpdok:, Aim:BTV157

V183 

Variable intake manifold runner motor Type:BT, Slpdok:, Aim:BTV183

131  - Ground connection 2 (in engine compartment wiring harness)

201  - Ground connection 5 (in engine compartment wiring harness)

D115  - Connection 13 (in engine compartment wiring harness)

* Omitted As A Running Change 

*2 Running Change