Monitor-Id $3C(60) : Fuel Tank EVAP System Integrity/Leak Test (0.20/0.5MM)
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Monitor-ID 3C".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test-ID (TID) (Hex-ID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| 129 ($81) | P0456 | Tank leak test: Pinhole leak (0.5 mm). | 4500..6500 mSec | 65535 mSec | Refer to DTC P0456 in the DTC TABLES . |
| 130 ($82) | Fuel Tank Leak Test. | 6.4 g | 65535 g |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.