Windshield Washer Fluid Level Sensor -G33-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2014 Volkswagen Touareg, 2013 Volkswagen Touareg, 2012 Volkswagen Touareg, and 2011 Volkswagen Touareg. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electric consumers and remove the key.

-- Remove the windshield washer fluid reservoir. Refer to WINDSHIELD WASHER FLUID RESERVOIR, REMOVING AND INSTALLING .

-- Unlock and disconnect the connector -1- and remove the Windshield Washer Fluid Level Sensor -G33- -2- from the rubber seal.

Fig 1: Identifying Connector -1- And Windshield Washer Fluid Level Sensor -2-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.