Special Tools

WARNING: This page is about a different car, the 2021 Audi e-tron Quattro and 2019 Audi e-tron Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Wrench - Driver: T10072

Fig 1: Identifying Socket Wrench T 10072
Courtesy of AUDI OF AMERICA, LLC
Digital Caliper: VAS6335

Courtesy of AUDI OF AMERICA, LLC
Camera: VAS6331/1 or : VAS701001/1
Calibration Tool: VAS6350A

Courtesy of AUDI OF AMERICA, LLC
Calibration Tool - Spacing Laser: VAS6350/2A
Calibration Tool - Linear Laser: VAS6350/3A

Fig 2: Identifying Linear Laser
Courtesy of AUDI OF AMERICA, LLC
Setting Device - Basic Set: VAS6430/1 or Setting Device - Basic Set: VAS6430/1A

Fig 3: Identifying Setting Device VAS 6430
Courtesy of AUDI OF AMERICA, LLC
ACC Reflector Mirror: VAS6430/3
Clip release lever number 4 from the Scraper Set: VAS6845

Courtesy of AUDI OF AMERICA, LLC
Not Illustrated:
Wheel Alignment Computer approved by VW/Audi
Screwdriver with T-bar : VAS272001
Calibration Board Laser Scanner: VAS6430/12
Mounting: VAS6430/12-1
Calibration Tool - Lane Change Calibration Tool: VAS6350/4
Adapter VAS6430/9 : VAS6430/9 , only for surface mounted hoist with a dimension greater than 300 mm.
Calibration Tool - R8 Wheel Adapters: VAS6350/5
Vehicle Diagnostic Tester