Chip Card Reader Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the glove compartment.
-- Remove the chip card.
-- Slide the Chip Card Reader Control Module -J676- -1- toward the rear, in the direction of -arrow-, until it can be removed from the trim -2-.
-- Remove retaining clip -4-.
-- Disconnect the connector -3- from the Chip Card Reader Control Module -J676- -1-.