Chip Card Reader Control Module -J676-, CONNECTOR ASSIGNMENT

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Chip Card Reader Control Module -J676-

NOTE:

Unlisted connector terminals are not assigned.

Fig 1: Multipin connector, 32-pin black

Courtesy of AUDI OF AMERICA, LLC

1-16 -

to the Traffic Data Antenna -R173-

17 -

VICS data wire to the Information Electronics Control Module 1 -J794-

19 -

VICS data wire to the Information Electronics Control Module 1 -J794-

21 -

Switch-on signal to the Information Electronics Control Module 1 -J794-

22 -

Terminal 30

23 -

ETC data to the Information Electronics Control Module 1 -J794-

25 -

ETC data from the Information Electronics Control Module 1 -J794-

28 -

Terminal 31