LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2013 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 548 (Communication) >> 91 Communication >> Voice Recognition System >> Voice Recognition System, Removing And Installing >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Voice Recognition System, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the Information Electronics Control Module 1 -J794-, refer to Information Electronics Control Module 1 -J794-, REMOVING AND INSTALLING .

Perform the following function test:

-- Switch on the Radio -R-.

-- Briefly depress PTT  button on multifunction steering wheel.

A "Ping" tone sounds, the speech input system is active.

-- Say "Help".

Since the Radio -R- is active, the speech dialog system responds with "Commands for the radio are...".

Depending on the equipment, other functions can be selected:

-- If a telephone is installed, say "telephone".

The speech dialog system switches to the telephone mode.

-- Press and hold the PPT  button for approximately one second.

The speech dialog system responds with "Cancel" and is deactivated.