Auxiliary Function: Stabilizing Intervention

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

The ABS Control Module -J104- uses stabilizing functions in order to calculate the steering angle adjustments necessary to maintain dynamic stability. These correction values are sent to the Active Steering Control Module -J792- via the Instrument cluster/suspension CAN bus. The Active Steering Control Module -J792- adds the correction value to the calculated overlap angle. The corrected steering angle is then applied to the wheels. A safety system monitors the proper functioning of the Active Steering Control Module -J792-. All faults which, for safety reasons, lead to corrective intervention by the actuator are diagnosed. Refer to ACTUATOR . Depending on the nature of the fault, measures taken range from shutdown of selected sub-systems to a complete system shutdown. The Active Steering Control Module -J792- does not participate in run-on mode of the CAN bus via terminal 15.