Engine, Supporting In Installed Position: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi A6 Quattro, 2017 Audi A6, and 2016 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Tunnel crossmember installed.
-- Remove the engine cover. Refer to ENGINE COVER .
-- Remove the left and right foam wedge -1-.
NOTE:
Ignore the -arrows-.
-- Position the :10-222A on the left and right upper wheel housing longitudinal member, as shown.
-- Engage the :10-222A/11 on the engine lifting eye.
-- Lightly pretension engine with spindles.