Transmission Control Module, Removing And Installing: Removing

NOTE:

-- Remove the cover -A-, if equipped.

Fig 1: Identifying Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove screws -arrows- and pull out Transmission Control Module -J217- without tilting it.

Fig 2: Identifying Bolts And Transmission Control Module

Courtesy of AUDI OF AMERICA, LLC

-- Remove the double lip seal -B- from the Transmission Control Module -J217-.

NOTE:

Do not touch the pins in the connector -A-.

When positioning Transmission Control Module -J217-, make sure the sensor on the control module is not damaged.