Digital Sound System Control Module 2 -J787-, REMOVING AND INSTALLING, BANG & OLUFSEN, THROUGH MY 2014: Removing

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Open the left storage compartment in the luggage compartment.

The bracket with the Digital Sound System Control Module -J525- must be removed first.

-- Release and disconnect the connectors from the Digital Sound System Control Module -J525- -2-.

Fig 1: Locating Nuts And Screws -Arrows- On Bracket -1-

Courtesy of AUDI OF AMERICA, LLC

-- Insert the Fiber-Optic Repair Set - Connector Protective CapsVAS6223/9 -1- onto the MOST Bus connector -2-.

Fig 2: Identifying Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts and screws -arrows- on the bracket -1- and remove the Digital Sound System Control Module -J525- -2- with the bracket -1-.

Fig 3: Locating Nuts And Screws -Arrows- On Bracket -1-

Courtesy of AUDI OF AMERICA, LLC

The Digital Sound System Control Module -J525- covers the nuts on the Digital Sound System Control Module 2 -J787-.

-- Remove the screws -arrows- and remove the Digital Sound System Control Module -J525- -1- from the bracket -2-.

Fig 4: Locating Screws -Arrows- And Remove Digital Sound System Control Module -J525- -1- From Bracket -2

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nuts -arrows- on the bracket -2- and remove the Digital Sound System Control Module 2 -J787- -1- from the bracket -2-.

Fig 5: Removing Digital Sound System Control Module 2 -J787- -1- From Bracket -2-

Courtesy of AUDI OF AMERICA, LLC