Monitor-Id $3C (60): Fuel Tank EVAP System Integrity/Small Leak Test (0.20)
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Monitor-ID $3C (60)".
-- Select the desired "Test-ID" or "Hex-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $81 (129) | P0456 | Fuel Tank Leak Test: Very Small leak. | 4.5mSec. | 65535 mSec | Refer to DTC P0456 in the DTC summary table. DTC TABLES P0456 |
| $82 (130) | --- | EVAP Monitor System OK by initial Purge check. | 6.4 g | 6553.5 g | --- |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition OFF.