LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2014 >> A4 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 1059 (Automatic Transmission External Controls) >> Diagnosis And Testing >> External Controls >> Pinpoint Tests >> Pinpoint Test B : DTC (Diagnostic Trouble Code) P0563 >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test B : DTC (Diagnostic Trouble Code) P0563: Notes

WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

DTC P0563 

Refer to Wiring Diagram Transmission Controls for schematic and connector information.

Normal Operation and Fault Conditions 

The GSM requires an operating voltage between 9 and 16 volts. The GSM receives this voltage from the BCM and has a single ground circuit. Excessive resistance or an open in one or more of these circuits, a discharged battery or a inoperative charging system results in the GSM setting a DTC.

An overcharging condition in the charging system results in the GSM module setting a DTC. This DTC may also set in the GSM module due to battery charging or vehicle jump starting events.

GSM: DTC Fault Trigger Conditions 

DTC Description Fault Trigger Conditions
P0563 System Voltage High: Circuit Voltage Above Threshold This DTC sets in continuous memory if the voltage supplied to the GSM module is above 16 volts for more than 3 seconds.

Possible Sources