Transfer Case Control Module (TCCM): Removal
WARNING: This page is about a different car, the 2018 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the CJB cover.
- Remove and disconnect the lower access panel.
-
NOTE: The TCCM has slotted mounting holes. It is not necessary to remove the LHTCCM nut when removing the TCCM.
Loosen the LH (Left-hand) TCCM nut and remove the RH (right-hand) TCCM nut.
Torque
: 62 lb.in (7 Nm)
- Disconnect the electrical connectors and remove the TCCM.