Front Peripheral Camera - R243- Calibrating: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Calibration Tool - VAS6350A-
- Peripheral Camera Calibration Device - VAS6350A/6-
- Vehicle Diagnostic Tester
The Front Peripheral Camera - R243- is installed in the bumper cover between the Audi rings (between Night Vision System Camera - R212- and Garage Door Opener Control Module -J530-).
- Establish the requirements. Refer to Peripheral Camera System, Calibrating .
- Install and align the -VAS6350A- with - VAS6350A/6-. Refer to alibration Tool VAS6350A with Peripheral Camera Calibration .
- Connect the Vehicle Diagnostic Tester.