WASTEGATE Bypass Regulator Valve - N75-, Checking: Notes

General Description

Both the boost and intake pressures are used to control the wastegate of the turbocharger. These pressure signals are supplied to the Engine Control Module -J623-, which then sends a pulse-width modulated signal to the Wastegate Bypass Regulator Valve -N75-. As a result, the Wastegate Bypass Regulator Valve -N75- controls the vacuum supply to the pressure unit, which directly acts on the wastegate via a connecting rod. This control system regulates the turbine speed and sets the maximum boost pressure.

Special Tools And Workshop Equipment Required 

• Multimeter.
• Wiring Diagram.
• Scan Tool.

Test requirements 

• Fuses OK.
• Battery voltage OK.
• Switch OFF all electrical and electronic accessories.
• Vehicles with automatic transmission, ensure the selector lever position is in "P".
• Vehicles with manual transmission, ensure the shifter lever position is in "N" with the parking brake applied.
• Observe all safety precautions: SAFETY PRECAUTIONS .
• View clean working conditions: CLEAN WORKING CONDITIONS .