Low Fuel Pressure Sensor -G410-, Checking: Notes

General Description 

The low-side fuel pressure is constantly monitored by the Low Fuel Pressure Sensor -G410- and sent to the Engine Control Module -J623-. If this pressure deviates from the desired pressure, the Engine Control Module -J623- sends a signal to the Fuel Pump Control Module -J538-. The Fuel Pump Control Module -J538- then sends a PWM signal to the Transfer Fuel Pump -G6- until the desired fuel pressure is achieved.

Special Tools And Workshop Equipment Required 

• Multimeter.
• Wiring Diagram.
• Scan Tool.

Test requirements 

• Fuses OK.
• Battery voltage OK.
• Switch OFF all electrical and electronic accessories.
• Vehicles with automatic transmission, ensure the selector lever position is in "P".
• Vehicles with manual transmission, ensure the shifter lever position is in "N" with the parking brake applied.
• Observe all safety precautions: SAFETY PRECAUTIONS .
• View clean working conditions: CLEAN WORKING CONDITIONS .