Navigation System With Cd Drive Control Module -J401-, Removing And Installing, MMI, Through 11/03/2008: Removing

-- Open the left storage compartment in the luggage compartment

-- Loosen the nuts -3- -1-, -2-, -4- -5- on the Infotainment rack.

Fig 1: Identifying Nuts On Infotainment Rack

Courtesy of AUDI OF AMERICA, LLC

-- Tilt the rack into the luggage compartment until the connectors on the Navigation System with CD Drive Control Module -J401- are accessible.

-- Disconnect the connector from the MOST Bus.

-- Insert the Fiber-Optic Repair Set - Connector Protective Caps:VAS6223/9  -1- onto the MOST Bus connector -2-.

Fig 2: Fiber-Optic Cable Harness Connector And Protective Cap For Cable Connector VAS 6223/9

Courtesy of AUDI OF AMERICA, LLC

-- Release and disconnect the remaining connectors from the Navigation System with CD Drive Control Module -J401-.

-- Insert two clips from the Radio Removal Tool:T10057  into release slots on Navigation System with CD Drive Control Module -J401- until they engage. Points on the grip eyelets of tool face outward.

Fig 3: Inserting Radio Release Tool T10057 Clips Into Slots Of Navigation System With CD Drive Control Module J401 Until They Engage

Courtesy of AUDI OF AMERICA, LLC

-- Pull Navigation System with CD Drive Control Module -J401- out of the rack.

-- Remove Radio Removal Tool:T10057  by pressing locking tabs on Navigation System with CD Drive Control Module -J401-.