Wiring Diagram CALLOUTS For (Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface)

J285 

Instrument cluster control module Type:BT, Slpdok:, Aim:BTJ285

J533 

Data bus on board diagnostic interface Type:BT, Slpdok:, Aim:BTJ533

ST2 

Fuse panel 2

SD4 

Fuse 4 (on fuse panel D) Type:BT, Slpdok:, Aim:BTSD-

SD5 

Fuse 5 (on fuse panel D) Type:BT, Slpdok:, Aim:BTSD-

T20d 

20-pin connector Type:BT, Slpdok:, Aim:BTT20d

T32f 

32-pin connector Type:BT, Slpdok:, Aim:BTT32f

T46s 

46-pin connector Type:BT, Slpdok:, Aim:BTT46s

81  - Ground connection 1 (in instrument panel wiring harness)

135  - Ground connection 2 (in instrument panel wiring harness)

687  - Ground connection 1 on center tunnel Type:VB, Slpdok:, Aim:VB687

* Refer To Applicable Wiring Diagram For Fuse Positions 

*2 Refer To The Applicable Wiring Diagram For CAN Isolating Plug