Night Vision System Control Module, Removing and Installing: Removing: Notes
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2018 Audi S6, 2018 Audi A6 Quattro, 2018 Audi A6, 2017 Audi S6, and 2017 Audi A6 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Turn off the ignition and all electrical equipment and remove the ignition key.
- Loosen the front left seat and with the wires still attached and push rearward. Refer to Body Interior Front Seats; Overview - Front Seat.
- Remove the floor mat.
- Remove the sill panel. Refer to Body Interior Vehicle Interior Trim Panels; Overview - Rear Shelf.
- Remove the footrest. Refer to Body Interior Vehicle Interior Trim Panels; Overview - Footrest and Carpet.
- Disengage the carpet and push aside.
- Release the clips in the direction of -arrow-.
- Open the cover -1-.
- Push the retaining tab in the direction of -arrow- and remove the Night Vision System Control Module - J853- -3- from the E-box.
- Release connectors -1 and 2- and remove from the Night Vision System Control Module - J853- -3-
- First release the connector -2- and then