6.4 Lane Change Assistance Control Module - J769-/Lane Change Assistance Control Module 2 - J770-, Removing And Installing

Removing 

• Remove the rear bumper cover. Refer to Body Exterior (Rear Bumper; Bumper Cover, Removing and Installing).
• Disconnect the connector -2-.
• Remove the bolts -arrows-.
• Remove the lane change assistance control module -1- from the mount.

Installing 

Install in reverse order of removal. Note the following:

• Calibrate the Lane Change Assistance Control Module -J769-/Lane Change Assistance Control Module 2 - J770-. Refer to 6.5 Lane Change Assistance, Calibrating. 

Tightening Specifications 

• Refer to 6.1 Overview - Lane Change Assistance.